XP Deus II XTREM HUNTER Deep Seeking Metal Detector

The first DEUS II wireless headphones.

The WS6 are not just wireless audio headphones. Without the remote control, they can be a stand alone unit and connect with the coil for an extremely ergonomic and lightweight configuration. The WS6 Module can be unclipped and mounted on the stem to make the most of the control screen, the target display and all the settings. It is then ideally supplemented by the WSA II or WSA II-XL wireless headphones.

• WS6 slave of the remote (from 750gr with coil 22.5cm (9") and the remote control in its pocket): The remote control is master and controls the coil, the functions and the settings. The WS6 works as an headphones only.

• WS6 MASTER (+headphones): In this comfortable configuration (from 750gr with coil 22.5cm (9") and the WS6 in your pocket) the WS6 controls the coil, adjusts all the settings and displays the targets. The WS6 offers a very detailed graphic screen. In the near future you will be able to pair it with the upcoming XP wireless headphones WSA II / WSA II-XL or connect it to the FX03 wired XP headphones.

WS6 MASTER (WS6 only): This is the DEUS II lightest configuration. Here the WS6 module is clipped to the backphones (750gr with coil 22.5cm (9")). The WS6 controls the coil, adjusts all the settings and displays the targets. The WS6 offers a very detailed graphic screen.

P CONNECTOR MULTI-FEATURES

• Battery level

• Update software

• Wired headset (optional)

• Bone conduction headphones BH-01 (optional)

• IP68: Certified for submersion up to 20M, waterproofing and pressure resistance guaranteed

• Waterproof up to 20 Meters / 66 Feet

• All Terrain

• Shockproof

DEUS II Remote Control Cap setup

 

• GREY PLUG No. 1 = 1m max. This is the plug for common use on land or for a submerged remote control up to 1m.

• RED PLUG No. 2 = 20m max. For underwater use only. Make sure to replace it by the grey plug once back on land.

The remote control can be clipped and unclipped in 2 seconds... A simple thumb press on the bottom of the remote control is all it takes.

Programs

The 12 factory programs + 12 user programs

DEUS II has the advantage of offering a wide range of programs suitable for all ground and search conditions.

1GENERAL: FMF • Max. freq. 40khz • Conductive soil subtraction. GENERAL uses low and high frequencies and gives an excellent assessment of targets in the soil. It suits both beginners and experienced users. It offers an excellent target/false signal ratio in the ground, as it rejects the moisture in the soils, which can cause halos and false sounds when passing over holes, for example. You will therefore have more confidence on deep targets. This damp / wet soil subtraction thus attenuates the very low electric conductors like coke (coal, and conductive stone) and to a lesser extent certain very thin targets like aluminum foil.

2SENSITIVE: FMF • Max. freq. 40khz • Frequency addition. SENSITIVE uses low and high frequencies up to 40 kHz. Highly efficient on all targets, it will be very effective in mineralized and polluted ground when searching for the smallest targets.

3SENSI FT: FMF • Max. freq. 40khz • Frequency addition. SENSITIVE FULL TONES is based on the same platform as Prg. 2 - SENSITIVE, but it is configured with Full Tone audio mode, with Reactivity at 3 instead of 2.5. It offers a very rich and informative sound identification that requires a little more experience, as each target index generates a different tone in proportion to conductivity (see Discri > Full Tones). Very efficient in highly-polluted ferrous and mineralized ground.

4FAST: FMF • Max. freq. 40khz • Frequency addition. FAST is based on the same platform as Prg. 2 - SENSITIVE, but the audio is set to Pitch mode with Reactivity at 3 instead of 2.5 and uses the square audio feature. These three settings combined allow the machine to work fast in ferrous-polluted and mineralized ground.

5PARK: FMF • Max. freq. 24khz • Frequency addition. PARK is adjusted for searching recreational area’s such as, parks, dry sand beach, etc., sites that are normally polluted.

6DEEP HC: FMF • Max. freq. 14khz • Frequency addition. DEEP HIGH CONDUCTOR adds together very low and medium frequencies up to 14 kHz. Designed to better locate good conductivity targets, it is ideal for clusters of coins whilst maintaining excellent sensitivity to isolated coins using its 14 kHz frequency.

7DEUS MONO: MONOFREQUENCY adjustable from 4 to 45kHz. DEUS MONO works on a single frequency like 1, but combines the advantages of DEUS II, such as its expanded frequency range to 45 kHz, improved performance, audio quality, better EMI rejection, etc. There is more likelihood of connecting with an unstable frequency while using several simultaneous frequencies than with just one and the DEUS MONO could help you in these situations.

8GOLD FIELD: FMF • Max. freq. 40khz • Frequency addition. GOLD FIELD is intended for highly-mineralized gold-bearing ground. Gold nuggets are often seen as the ground or ferrous items in these tricky environments. It is set to “all metal” for deeper detection and only rejects the localised ground to which you should regularly adjust by Grabbing (see Ground). It will accept ground above and below your Ground setting.

9RELIC: FMF • Max. freq. 24khz • Frequency subtraction. RELIC is processed in the same way as Prg. 8 - GOLD FIELD, but uses lower subtracted frequencies to search for large masses. It is configured for “all metal” with low Reactivity and only rejects the localised ground to which you should regularly adjust by Grabbing (see Ground). It will then accept ground above and below this ground setting.

10 DIVING: FMF • Max. freq. 14khz • Conductive soil subtraction. DIVING is the first and most stable of three programs intended for submerging in saltwater environments or simply on wet sand. Its very low and medium subtracted frequencies will better locate valuable targets such as rings and coins, whilst naturally being less responsive to low conductive targets like aluminum foil compared to the more sensitive Beach 11 and 12 programs. It can thus save time and be more effective in difficult diving conditions.

11 BEACH: FMF • Max. freq. 24khz • Conductive soil subtraction. BEACH uses higher frequencies up to 24 kHz and thus is more sensitive to small targets compared to Diving. It is well suited to wet zones.

12 BEACH SENS: FMF • Max. freq. 40khz • Conductive soil subtraction. BEACH SENS incorporates frequencies up to 40 kHz offering excellent sensitivity to the smallest targets without losing performance on bigger targets. This is the deepest beach program for wet conditions but also the most reactive.

DEUS II Technical Specifications XP 11 FMF Coil

• Wireless FMF® Fast and simultaneous multi frequency coil

• 49 frequencies: from 4 to 45 kHz

• Wireless Coil battery life: up to 20H depending on programs and frequencies

• Weight: 470 gr

• Fully waterproof up to 20 meters

• Supplied with coil cover, screwing kit and lower stem

• 5 Year warranty (design to last)

• Made in France

Optional BH-01 Bone Conduction Headphones

XP is proud to present the first bone conduction headphones designed for metal detecting, BH-01. Made in France by XP, it is waterproof IP68 so you can dive with your DEUS 2 metal detector up to 20m deep.

Why a bone conduction headphones?

Using ordinary waterproof headphones underwater, the ear fills with water and hearing is often lessened. BH-01 sits in front of the ears on the cheekbone and transmits sound to the inner ear directly through vibrations applied to the bones, without straining the eardrums. Your ears are therefore free.

In disturbed or noisy water, you can dive usefully with ear plugs to avoid infection or simply to isolate yourself better from noise. You will thus hear the sound perfectly by bone conduction whilst protecting your ears.

You can also use these headphones on land with the freedom of being able to hear your surroundings or, conversely, to isolate yourself from noisy surroundings, once again with ear plugs.

BH-01 also allows the hearing impaired to feel the vibrations generated by the targets towards the cochlea, or simply the vibrations depending on the type of alteration of the hearing system. Adjusting the audio frequencies downwards (100 to 300 kHz) could further improve perception depending on the disorder.

DEUS II BH-01 Bone Conduction Headphones Specifications

• IP68 certified: waterproof up to 20m deep

• Multi terrain: underwater and for windy and noisy environments

• Designed to last, 5 Year warranty

Made in France

Specifications (Refer to the DEUS II pages for full more specs )

Settings when paired with the XTREM HUNTER

• Sensitivity
• Reactivity
• Adjustable Autotune
• Audio Threshold
• Iron rejection (IAR)
• Audio Response
• Frequency Scan (EMI noise cancel): Auto/Manual - 14 channels
• Ground Balance: Auto or Manual
• Recording 4 seconds with a Play/Pause option

General tech (XTREM HUNTER accessory)

• Simultaneous Fast Multiple Frequency (FMF®)
• Non-Motion with adjustable Autotune
• Wireless headphone compatibility: WSAII XL (waterproof IP68) - WSAII (weather proof) - WS6 (weather proof)
• Battery type: Li-ion 18650 x1 - 11 Watts/hour - 45g
• Battery life : >10 hours
• Charging time : ~4 hours
• Charge cable: USB-C
• Length assembled: 1.20m (3.94ft)
• XP Case: included - rain and shock proof
• Weight (Xtrem Hunter + remote): 2.9kg (6.4lb)
• Weight (Xtrem Hunter + XP case): 5.8kg (12,8lb)
• XP Case size: 725 x 480 x 170 mm (28’ x 18,9’x 6,7’)
• XP Backpack 280 : Optional
• Warranty: 5 years parts and labor - Batteries and connectors 2 years
• Patent: US 7940049 B2 - EP 1990658 B1 + patents pending

• 
   

XP have now enhanced the capabilities of the highly versatile DEUS II, the XTREM HUNTER its ultimate accessory to expand your detecting possibilities and has now set new standards in the world of "2 Box" deep seeking detectors

• SKU

233-XTR115RCWSA2XLEA

• Manufacturer SKU

XTR-115RCWSA2XLEA

• Product Type

Metal Detectors

• Best for

Advanced

• Warranty Yes, 5 years parts and labor - Batteries and connectors 2 years
• Detector Type All-Purpose
• Interchangeable Search Coil Yes
• Technology Simultaneous Multi-Frequency
• Arm Rest Adjustable
• Arm Rest Strap Yes
• Adjustable Shaft Yes
• Apps None
• GPS No
• Audio Tones Yes
• Depth Indication Yes
• Control Box Mount Convertible
• Frequencies 45kHz, 35kHz, 28kHz, 21kHz, 15kHz, 7kHz
• Number of Frequencies 6
• Programmable Target Id Yes
• Ground Balance Auto or Manual
• Vibration Mode No
• Search Modes 12
• Search Flashlight No
• Backlit Display Yes
• Volume Control Yes
• Headphone Jack Wireless
• Bluetooth Compatible No
• Interchangeable Headphones Yes
• Battery Type Lithium-Ion
• Battery Life (hr) 8 - 15 Hours
• Rechargeable System Yes
• Weight Xtrem Hunter + remote: 2.9kg (6.4lb) || Xtrem Hunter + XP case: 5.8kg (12.8lb)